Loule, Portugal Cimpor Design, manufacture and supply of a pulverised coal burner for combustion system upgrade.
Buxton, Derbyshire, England Longcliffe Calcium Carbonates Kiln thermal load analysis for proposed new powder treatment process.
Kwinana,
WA, Australia		 Alcoa of Australia Feasibility study of the potential for oxygen injection into a flash calciner.
Mandeville, Jamaica, West Indies Kaiser Aluminium Site survey and assessment of combustion and heat transfer in alumina kilns.
Morwell,
Victoria, Australia		 Australian Paper Trial installation of Gyro-Therm burner on black liquor recovery boiler.
Ketton, Rutland,
UK		 Castle Cement Consultancy re combustion and pre-heater build-up problems.
Paris,
France		 Air Liquide Study of the potential for oxygen enrichment in rotary kilns.
Southam-Works,
UK		 Rugby Cement Consultancy re the effect of waste fuel firing on kiln combustion, heat transfer and production rate.
Loughborough, 
UK		 British Gas Transco Techo-economic assessment of gas opportunities in cement, lime, refractory and minerals industries.
Hope, Derbyshire, 
UK		 Blue Circle Cement Combustion system upgrade for coal fired preheater kiln.
Wareham, Dorset, 
UK		 BP Oil Consultancy re flare combustion problems.
Townsville,
QLD, Australia		 Queensland Nickel Feasibility study for gas firing conversion of complete nickel refinery.
Berrima,
NSW, Australia		 Blue Circle Southern Cement Ltd Process engineering and detail design of upgrade for pulverised coal firing system to obtain percentage increased output.
Sheffield, UK Carr's Tool Steels Consultancy re control of furnace cooling rates.
Drax, Yorkshire,
UK		 National Power Consultancy re petroleum coke firing in power generation boilers.
Otorohanga,
New Zealand		 McDonald's Lime Feasibility study for coal firing system upgrade.
Drogheda,
Eire		 Premier Periclase Physical and mathematical modelling of combustion and heat transfer in a lime kiln.
Geelong,
Victoria, Australia		 Geelong Cement Physical and mathematical modelling of combustion cement kiln and heat transfer in a wet process.
Lithuania Akmenes Cement AB Site survey, physical and mathematical modelling of combustion and heat transfer in a cement kiln.
Milford Haven, Wales, UK Elf Oil UK Ltd Combustion Audit on petrochemical fired heater.
Southam-Works,
UK		 Rugby Cement Design and supply of a special atomiser and sprayer for recycled fuel.
Wolverhampton & London, UK Lovell, White & Durrant Expert witness statement concerning problems with an energy from waste plant.
Torreon,
Mexico		 Cemex, Central Physical and CFD modelling of combustion heat transfer and material concentration in precalciner cement kiln.
Lime Acres,
South Africa		 Explochem for PPC Lime Design and supply of high performance oil sprayer for lime kiln burner upgrade.
Rotterdam,
Netherlands		 John Zink for Exxon Corporation Physical modelling of combustion air ducting of petrochemical fired heater.
Bukowa,
Poland		 Lhoist Site survey and process analysis of vertical shaft, mixed feed lime kiln.
Northfleet,
Kent, UK		 Blue Circle Cement Dual fuel (pulverised coal/oil) kiln burner upgrade.
Loule,
Portugal		 Cimpor Site survey, process analysis and model study to identify cause of combustion problems and refractory failures, which occurred following cooler upgrade.
Greenbushes,
WA, Australia		 Gwalia Consolidated One day site visit and consultancy to identify cause of problems with fluid bed lithium carbonate calciner.
Oude Pekela,
The Netherlands		 Born Heaters Petrochemical heater troubleshooting.
Townsville,
QLD, Australia		 Queensland Nickel Ltd Process audit of nickel reduction kiln.
Ratcliff, Notts,
UK		 Powergen PLC Study of potential techniques for the on-line measurement of pulverised coal flowrates.
Roxby Downs,
SA, Australia		 WMC Resources Ltd Model study of combustion and heat transfer in proposed copper anode furnace.
Kwinana,
WA, Australia		 WMC Resources Ltd Process assessment of sinter furnace stability. Modelling of furnace and preparation of report with recommendations to improve operation and control stability.
Geraldton,
WA, Australia		 CMPS&F for RCG Mineral Sands Site survey and safety assessment of acid leaching system to assess risk of hydrogen evolution forming flammable mixtures. Recommendations for hazardous area classification.
Pembroke,
Wales, UK		 KBC Process Tech. for Total Oil (UK) Ltd Site survey and combustion audit of petrochemical fired heater.
Humberside,
UK		 Conoco Ltd Performance evaluation of petrochemical fired heater.
Adelaide,
SA, Australia		 Adelaide Brighton Cement Ltd Design and manufacture of gas burner nozzle and swirler to improve flame stability on precalciner start up burner.
Kunda,
Estonia		 Termorak OY for Kunda Cement Supply of infra-red flicker main flame detection system.
Kuusankoski,
Finland		 Termorak OY for
Kymi Paper		 Site survey and model study to resolve aerodynamic problem in rotary kiln. Design of simple modification to cooler inlets resolve problem.
Kwinana,
WA, Australia		 Fuller FLS for Cockburn Cement Ltd Design and supply of two Flame front ignition system and controls for rotary kiln burners.
Kwinana,
WA, Australia		 Western Mining Corporation Literature search for technical information on techniques for preventing down draughts (Cowls)
Varkaus,
Finland		 Termorak OY for Corenso AB Design and supply flame front ignition system and controls for an existing rotary kiln burner
London, UK Baker & McKenzie
for Rugby Cement		 Expert Witness statement for the defence in a prosecution brought under the Environmental Protection Act 1990. (Prosecution dropped by HMIP, following receipt of statement).
Visshakapatnum,

India

Fuller Minerals Processing for Raine Calcining Review of heat and mass balance, together with physical and CFD modelling of pet coke dust incinerator for coke calcining kiln with energy recovery for electricity generation.
Panipat,
India		 John Zink for
Engineers India		 Physical modelling of combustion air ducting of cylindrical petrochemical fired heater.
Melbourne,
Victoria, Australia		 Potters Industries Physical modelling of glass bead furnace.
Aberthaw, Wales,
UK		 Blue Circle Cement Supply of infra-red flicker main flame detection system.
Woodstock, Ont.,
Canada		 Global Stone Corp. Site survey, process analysis and physical modelling of a vertical shaft lime kiln.
Gladstone,
QLD, Australia		 Queensland Alumina Design and manufacture and supply of 8 Gyro-Them burners with flame front ignition systems. Eight for the alumina kilns and 2 Gyro-Therm burners for the lime kilns.
Risley, UK AEA Technology Process design of liquid sodium heater.
Nottingham,
UK		 ABB Flakt Measurement of combustion gas temperatures (+800oC) in a municipal waste incinerator.
Wagerup,
WA, Australia		 Alcoa of Australia Process assessment of oxalate kiln performance.
Auckland,
New Zealand		 Austrian Energy for BHP New Zealand Steel Review of 55 MW CO boiler design with respect to combustion, ash, deposition, safety and fireside heat transfer.
Belgaum,
India		 Indian Aluminium Company Limited Design of a high performance oil burner for a rotary alumina kiln. Supply of critical components.
Northfleet, UK Blue Circle Cement Refurbishment of kiln warm-up trolley.
Adelaide,
SA, Australia		 Adelaide Brighton Cement Process design of petroleum coke grinding system.
Teesside, UK British Chrome & Chemicals Burner upgrade on chrome oxide kiln.
Oman Born Heaters Consultancy to resolve combustion driven pulsation problem.
Sunbury, UK BP Physical modelling to validate CFD modelling of new process.
Point Comfort,
TX, USA		 Alcoa Process design, physical and mathematical modelling of Mk 6 calciner.
Oakamoor,
Staffs., UK		 Hepworth Minerals
& Chemicals		 Process design of suspension preheater.
Marulan,
NSW, Australia		 Blue Circle Southern Cement Mathematical modelling of combustion and heat transfer in a lime kiln.
Wagerup,
WA, Australia		 Alcoa of Australia Design, manufacture and supply of main kiln burner and afterburner and ancillaries for liquor burning kiln.
Amersham, Bucks., UK John Zink Co. Ltd. Atomiser spray test to determine pressure flow and drop size performance characteristics.
Gladstone,
QLD, Australia		 Queensland Alumina Design, manufacture and supply of start-up burner for Lurgi fluid bed alumina calciner.
Antigua,
West Indies		 Antigua Power & Utilities Authority Supply of parts, site supervision to refurbish power and desalinisation plant burners.
Sunbury, UK BP Chemicals Consultancy re specialised atomiser design.
Kirkvine,
Jamaica		 Alcan Series of combustion courses for managers, engineers and operators of boilers and rotary kilns at Kirkvine and Ewarton refineries.
Gold River,
BC, Canada		 Avenor Pulp & Paper Physical and mathematical model study of combustion and heat transfer in a lime sludge kiln. Design, manufacture, supply and commissioning of a dual fuel kiln burner.
Rockhampton,
WA, Australia		 Alcoa of Australia Combustion course for process, mechanical and control engineers at Kwinana, Pinjarra and Wagerup refineries.
Cochabamba, 
Bolivia		 Coboce IRPA Site survey, physical and mathematical modelling of combustion and heat transfer in a precalciner cement kiln.
Singapore John Zink & Foster Wheeler for Singapore Aromatics Company Physical modelling of air distribution in combustion air ducting in two petrochemical heaters.
Rochester,
Kent, UK		 Rugby Cement Physical and mathematical modelling of combustion and heat transfer in coal fired Lepol grate cement kiln.
Angaston,
SA, Australia		 Adelaide Brighton Cement Physical and mathematical modelling of gas fired Lepol grate cement kiln and refurbishment of burner to provide 40% increased output.
Geelong,
Victoria, Australia		 Geelong Cement Process design of brown coal briquette grinding and firing system.
Amherstburg, Ont., Canada General Chemical Limited Physical and mathematical modelling of vertical shaft lime kiln, process and mechanical design of gas firing conversion.
Gladstone,
QLD, Australia		 Queensland Alumina Pulverised coal fired boiler start-up safety assessment.
Jordan Denver Sala Consultancy and physical modelling to determine the cause of refractory failures in two oil fired air heaters.
Panipat,
India		 John Zink for
Engineers India		 Physical modelling of air distribution in combustion air ducting of two petrochemical heaters.
Wickcliffe,

KY, USA

Fuller FLS for Westvaco Physical and mathematical model study of combustion and heat transfer in a lime sludge kiln. Design, manufacture, supply and commissioning of a dual fuel kiln burner and valve train.
Castlegar,

BC, Canada

Celgar Pulp Physical and mathematical model study of combustion and heat transfer in a lime sludge kiln. Design, manufacture, supply and commissioning of a dual fuel kiln burner and valve train.
Amherstburg,
Canada		 Union Gas for
General Chemical		 Site survey, process analysis and feasibility study for the conversion of a mixed feed vertical shaft lime kiln to gas firing.
Jonquiere,
Que, Canada		 Alcan Site survey, process analysis, burner optimisation, staff and operator training.
Kwinana,
WA, Australia		 Western Mining Corporation Physical modelling of nickel sinter furnace hydrogen incinerator.
Gladstone,
QLD, Australia		 Queensland Alumina Site investigation, process analysis, physical and mathematical modelling and supply of Gyro-Therm burner for alumina kiln.
Sunbury, UK BP Research Measurement of emissions from burning of a potential industrial liquid fuel.
Quesnel,
BC, Canada		 Cariboo Pulp & Paper Design and supply of six high performance oil sprayers to upgrade power boiler.
Kwinana,
WA, Australia		 Alcoa Assessment of techniques available for reduction of VOC emissions from a liquor burning plant.
Grande Prairie
Al, Canada		 Ahlstrom for Weyerhaeuser Physical and mathematical modelling of combustion and heat transfer in a lime sludge kiln.
Belgaum, India Indian Aluminium Physical and mathematical modelling of combustion and heat transfer in an alumina kiln.
Flint, Wales Kimberly Clark Design, supply and commissioning of high pressure direct fired air heater.
Crabbs Point,
Antigua		 H&H International for Antigua Power & Utilities Site survey, supply of valve trains, supervision of installation of new oil burners on a power boiler and commissioning.
Parainen,
Finland		 Termorak OY for
Nordkalk		 Physical and mathematical modelling of pulverised coal fired lime kiln.
Staffordshire,
UK		 Hepworth Minerals & Chemicals Limited Site survey and mathematical modelling of crystobilite kiln. Design, supply and commissioning of new high performance dual/fuel burner.
Perth, WA,
Australia		 Adelaide Brighton for Swan Cement Physical and mathematical modelling of a Gyro-Therm burner in a cement kiln.
Springfield,

Or., USA

Weyerhaeuser Site survey, process analysis, physical and mathematical modelling of combustion and heat transfer in a lime sludge kiln. Design and supply of a new dual fuel burner, which saved 1MMBtu/ton and improved refractory life by more than 100%.
Brighton, UK Born Heaters Mathematical modelling of process heater tube shielding.
Pinjarra,
WA, Australia		 Alcoa of Australia Review of product coolers available for a proposed liquor burning kiln.
Perth, WA,
Australia		 Thermal Systems Design and supply of oil burner upgrade kit.
Weardale, Co. Durham, UK UK Waste for Blue Circle Cement Design and supply of special sprayer for burning recycle fuel in a cement kiln.
Sao Luis,
Maranhas, Brazil		 Alumar Brazil Physical and mathematical process modelling of oil fired alumina flash calciner.
Eaglescliffe,
Teesside, UK		 British Chrome & Chemicals Process survey, process analysis and modelling of two di-chromate kilns.
Kwinana,
WA, Australia		 Alcoa of Australia Physical and mathematical modelling of alumina flash calciner upgrade.
Kettering,
UK		 Carlton Deep Sea Systems Fuel cell reformer design for operation in deep sea submarines.
Quesnel,
BC, Canada		 Cariboo Pulp & Paper Physical and mathematical modelling of combustion and heat transfer in a lime sludge kiln. Design, supply and commissioning of a new high performance dual fuel burner.
Nottingham, UK Waste Notts Garbage incinerator combustion temperature survey.
Maidenhead, UK Barr & Murphy Leather waste burning trials.
York, PA, USA Baker Refractories NOx assessment for two rotary kilns.
Ellesmere Port,
UK		 Cleanaway Limited Assessment of the potential for burning waste liquids in UK cement plants.
Plymouth,
UK		 Blue Circle Cement Design and supply of a high performance dual fuel burner system for rotary cement kiln. Commissioning of burner.
Ipswich,
UK		 Blue Circle Cement Design of high performance dual fuel burner for rotary cement kiln. Supply of critical burner parts, burner management system and commissioning.
Prince Albert, 
Canada		 Weyerhaeuser Kiln operator training using portable acid/alkali modelling.
Rugby, UK Rugby Cement Consultancy services for electrostatic precipitator protection.
Tacoma,
WA, USA		 Weyerhaeuser Kiln operator training using portable acid/alkali modelling.
US Virgin Islands Virgin Islands Alumina Corporation Site survey, process analysis, physical and mathematical modelling of combustion and heat transfer in an alumina kiln. Design and supply of two oil burner upgrade kits which produced a 7% fuel saving.
Cochin, India John Zink Water bead/air modelling of combustion air ducting for two petrochemical heaters.
Cleveland,
USA		 BP Acid/alkali and mathematical modelling of a proposed reactor system.
Mackenzie,
BC, Canada		 Fletcher Challenge Physical and mathematical modelling of a lime sludge kiln. Design and supply of a new high performance dual fuel burner. Commissioning of burner.
Pinjarra,
WA, Australia		 Alcoa of Australia Physical and mathematical modelling of alumina flash calciner upgrade.
Pinjarra,
WA, Australia		 Alcoa of Australia Safety assessment of light-up sequence of gas fired water tube power boiler.
Humberside,
UK		 Conoco Test of existing proprietary pilot burner to check flame stability with proposed fuel gas.
Drax, Yorkshire,
UK		 National Power Acid/alkali modelling of 600 MWe power boiler main and re-burn (NOx reduction) combustion systems.
Berlin,
Germany		 ABT (UK) Limited Freeboard modelling of a circulating fluid bed garbage incinerator.
Gladstone,
QLD, Australia		 Queensland Alumina Physical and CFD modelling of a power boiler coal firing system to assess fire and explosion risks.
Ravena, N.Y., 
USA		 Blue Circle Cement Inc Design, manufacture, supply and commissioning of motorised mobile oil fired light-up system for a cement kiln.
Leatherhead, UK National Power Waste fuel combustion test.
Prince Albert,
Canada		 Fuller FL Smidth for Weyerhaeuser Physical and mathematical modelling of Compax cooler together with combustion and heat transfer modelling of a lime sludge kiln.
Burntisland, Scotland, UK BA Chemicals
Limited		 Consultancy services for electrostatic precipitator explosion protection.
Fremantle,
WA, Australia		 Fuller FL Smidth for Cockburn Cement Two gas burners for riser duct firing of a four stage preheater lime kiln.
Wagerup,
WA, Australia		 Clyde Carruthers for Alcoa of Australia Process and detailed design of a low heat flux burner for an oxalate kiln. Supply of critical parts.
Weardale, Co. Durham, UK Blue Circle Cement Design and supply of a high performance dual fuel burner (oil/pulverised coal) for a cement kiln.
Pinjarra,
WA, Australia		 Alcoa of Australia Process design and combustion modelling of flash drier.
The Netherlands Rodenhuis & Verloop Hire of FCT spray test rig for oil atomiser development.
Kamloops,
BC, Canada		 Fuller for

Weyerhaeuser

Site survey and process analysis of combustion and heat transfer in a lime sludge kiln. Design, supply and commissioning of a high performance dual fuel burner.
Ewarton,
Jamaica		 Alcan Design, manufacture and supply of oil burner upgrade kits for three alumina kilns.
Bitonto,
Italy		 Conveco SRL Design, manufacture and supply of high temperature landfill gas flare and associated gas analysis system.
Burnley, Lancs.,
UK		 ERG Environmental

for Sterling Paper

Design, supply and commissioning of two in-line digester exhaust heaters.
Serdiana,
Italy		 Conveco SRL Design, manufacture and supply of two high temperature landfill gas flares and associated gas analysis equipment.
Kingston, Jamaica

West Indies

Caribbean Cement Site survey, process modelling of kiln combustion and heat transfer of preheater cement kiln. Process and detailed design of coal firing system upgrade from direct to indirect firing. Project management, site installation, commissioning and operator training.
E. Kalamantan, Indonesia PT Badak Design, manufacture and supply of liquid waste incinerator for a gas liquefaction plant.
Portsmouth,
UK		 CJB Developments Limited Process modelling and detail design of a methanol reformer for a 10 kW fuel cell system.
Humberside,
UK		 BOC Special Gases Design, manufacture and supply of elevated flare system for cryogenic gases.
Berlin,
Germany		 ABT (UK) Limited Process modelling and design of an afterburner for soil remediation plant.
Borgomontello,
Italy		 Conveco SRL Design, supply and commissioning of high temperature landfill gas flare.
Cork,
Ireland		 ADM Ringaskiddy Design, supply and commissioning of large biogas flare system for pharmaceutical plant.
Essex, Kent and Sussex, UK Blue Circle Landfill Design, manufacture, supply and commissioning of three high temperature landfill gas flares.
Kirkvine,
Jamaica		 Alcan Site survey, process analysis and physical modelling of power station water tube boiler.
Bari,
Italy		 Conveco SRL Design, supply and commissioning of a high temperature landfill gas flare.
Vancouver, BC,
Canada		 Tilbury Cement Consultancy to assist with resolving combustion and flame impingement problems with Rotaflam burner.
Grangemouth, Scotland, UK Born Heaters for BP Modelling of process heater transient response following process trip.
Gladstone,
QLD, Australia		 Queensland Alumina Electrostatic precipitator gas explosion investigation.
Maumelle,
Arkansas, USA		 Kimberly-Clark Design, supply and commissioning of a direct fired pressurised air heater.
Terneuzen,
The Netherlands		 Born Heaters for DOW Chemicals Design, supply, installation and commissioning of burner modification kits to eliminate combustion driven pulsation problem on a gas fired air heater.
Terneuzen,
The Netherlands		 Born Heaters for DOW Chemicals Design and supply of a new igniter/pilot systems to replace existing defective units.
Terneuzen,
The Netherlands		 Born Heaters for DOW Chemicals Heat transfer modelling to determine the cause of lining failure in an air heater.
Sussex,
UK		 AMEC for BASF Design, supply and commissioning of a waste solvent oxidiser and VOC control unit.
Weipa,
QLD, Australia		 Comalco Spray tests of existing burner and atomiser, physical and mathematical modelling of combustion and heat transfer in a bauxite calcining kiln.
Ipswich,
UK		 Blue Circle Cement Design and supply of a sprayer for recycle fuel trials.
Tokyo,
Japan		 Haldor Topsoe for

NOC

Combustion and heat transfer modelling of 100 kW reformer. Process and basic design of the burner.
Humberside,
UK		 Conoco Combustion and heat transfer modelling of a pet. coke calcining kiln. Design and supply of a high performance dual fuel burner (refinery gas/coke fines) for the kiln.
Adelaide,
SA, Australia		 Adelaide Brighton Cement Limited Flammability and electrostatic precipitator trip level assessment for a gas fired precalciner cement kiln.
Frankfurt,
Germany		 Born Heaters Physical and mathematical modelling of the exhaust heater and plume rise for the European Transonic Wind Tunnel.
Volos,
Greece		 Heracles General Cement Site survey, process investigation and physical and mathematical modelling of the combustion and heat transfer in a cement kiln and precalciner.
Palatka, Fl.,
USA		 Georgia Pacific Design, manufacture and supply upgrade kit for rotary kiln oil burner.
Kirkvine,
Jamaica		 Alcan Design, manufacture and supply upgrade kit for rotary kiln oil burner
Cambridge,
UK		 Rugby Cement Design and supply of a mobile oil fired light-up burner for a coal fired cement kiln.
Le Creusot,
France		 Framatome Design and supply of Vortex combustor for incinerating graphite fines.
Port Alberni,
BC, Canada		 MacMillan Bloedel Combustion and heat transfer modelling for the conversion of a lime sludge kiln from oil firing to gas firing. Design, supply and commissioning of a new high efficiency dual fuel kiln burner.
Ewarton,
Jamaica		 Alcan Design and supply of two flame front ignition systems.
Belfast,
Ireland		 Belfast City Council Design and supply of a landfill gas extraction and monitoring system with landfill gas fired inert gas generator, gas conditioning and re-injection system.
Kirkvine,
Jamaica		 Alcan Design and supply of a high efficiency oil burner for a lime kiln.
South Africa IMS for Gypsum Industries Design of pulverised coal fired air heater and coal firing system for a gypsum plasterboard plant.
Askeaton, Eire Aughinish Alumina Computational fluid dynamic modelling of flash calciner.
Portoscuso,
Italy		 Eurallumina SPA Site survey and performance audit to prepare design brief for uprating an alumina kiln.
Kobe,
Japan		 Haldor Topsoe A/S 
for KEPCO		 Design and supply of dual gas burner for 5 MW fuel cell power plant.
Geraldton,
WA, Australia		 Western Titanium Limited Design and supply of a dual fuel kiln burner complete with oil and gas valve trains, burner management system and electrically driven overhead trolley for synthetic rutile kiln.
Northfleet,
UK		 Blue Circle Cement Design and supply of a mobile oil fired light-up burner for three cement kilns. The unit is complete with oil and gas valve trains and burner management system.
Townsville,
QLD, Australia		 North Australian Cement Limited Site survey, process design and economic assessment for upgrading a pulverised coal grindi
To the FCT home page